Product Overview
NDS3543B DVB-S/S2 modulator is equipped with 1 ASI input. After multiplexing process, the device converts the multiplexed TS into DVB-S/S2 RF out. It also output the TS through ASI and IP ports.
It adopts inner drawer-type structural design which makes it possible for users to insert encoding modules (SDI/HDMI/YPbPr/CVBS…) as needed.
In conclusion, its cost effective design makes the device widely used in satellite digital TV broadcasting etc.
Key Features
● 1*ASI in for re-mux
● 1*RF in for RF mix
● Digital DVB-S/S2RF out
● ASI out; IP(MPTS) out over UDP
● Excellent modulation quality
● LCD display, Remote control and firmware
● Web-based NMS management; Updates via web
Input Interface |
1×ASI input, 1xRF input for mix |
Output |
1xDVB-S/S2 RF output |
2xASI mirrored output |
IP (MPTS) out over UDP (RJ45, 100M) |
DVB-S/S2 Modulation Section |
DVB-S: FEC 1/2,2/3,3/4,5/6,7/8 |
DVB-S2 QPSK: FEC 1/2,3/5,2/3,3/4,4/5,5/6,8/9,9/10 |
DVB-S2 8PSK FEC 3/5,2/3,3/4,5/6,8/9,9/10 |
RF output: 950.00-1050.00 MHz, 1Khz step |
DVB-S and DVB-S2 QPSK Symbol rate: 0.05-40.0Msps DVB-S2 8PSK Symbol rate: 0.05-26.0Msps |
DVB-S Roll Off: 0.35 DVB-S2 Roll Off: 0.35, 0.25, 0.2 |
Output level: -30db~-10.0db |
System
Local Control |
LCD + control buttons |
Remote Control |
Web NMS |
Language |
English |
RF 24V Power Out |
Support |
Physical Specification
Demission |
482×300×44mm (W*L*H) |
Temperature |
0~45℃(operation), -20~80℃(storage) |
Weight |
3.5kgs |
Power Supply |
AC 100-240V 50/60Hz |